Hang on, throw caution to the wind, and fly – for the sky is the limit with your new Aviator model.

You'll be the captain and builder of your Aviation Tower. Assemble 726 wooden pieces to see this masterpiece come to life. Once complete, you are clear for takeoff!

A DISPLAY WOODEN AVIATION MODEL WITH ALL THE BELLS & WHISTLES

The model has three modules:

• An airplane
• A helicopter
• A flight control tower

Choose between your aircraft, set one on the tower’s bar and you are good to fly.

As a beginner pilot, you might want to start with the helicopter which is not as difficult to control as the airplane. Easier to manipulate but no less exciting, your chopper has a cockpit with doors that open and shut, and three-blade main and tail rotors.

The airplane has a higher velocity and requires a certain skill to operate. This module is based on the wire-braced biplane and has a 5 piston motor.

To learn how to fly this wayward bird you may need several flight hours – but it is of course part of the fun! Besides, you would have already become acquainted with the basics if you started with the copter. 

However, your cockpit is the control tower, a sophisticated device with a high-performance motor that powers the rotation of the swash plate with the bar – with an aircraft on one side and balances weight on the other.

The control tower is operated with two control bars: 

- the control column regulates the roll and pitch of the flying machine;

- and the Motor controller to adjust RPM (revolutions per minute) sets the speed of the aircraft. 

Why Build An Aviation Control Model Kit?

😌 Great way to relieve stress.

⛔ No glue or special tools needed for assembly.

🎨 Boost your creativity by painting/staining it.

❇️ A fabulous piece of décor that you’ll love admiring for many years.

⚙️ It's a fully-functioning masterpiece. 

Aviation Control Tower Contents & Specifications

Console base size: 16.5" Length x 13.4" Height x 12.2" Width (inches)

Plane size: 5.5" Length x 4.7" Height x 3.1" Width (inches) 

Helicopter size: 8.7" Length x 7.1" Height x 3.5" Width (inches) 

Number of components: 726

Estimated time for assembly: 15 hours